UF Membrane Module PVC Ultrafiltration Membrane Module UFc8040 RO izindlu

Incazelo emfushane:

Uhlolojikelele Lomkhiqizo

I-UFc8040 i-capillary hollow fibre membrane iyimpahla ye-polymer ephezulu, engeke ibe noshintsho lwesigaba. Impahla ye-PVC eguquliwe, eyamukelwa kulo mkhiqizo, inezinga elihle lokungena, izakhiwo ezinhle zemishini, ukumelana okuhle kwamakhemikhali nokumelana nokungcola. I-MWCO iyi-100K Dalton, i-ID/OD ye-membrane ingu-1.0mm/1.8mm, uhlobo lokuhlunga lungaphakathi-ngaphandle.


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izinhlelo zokusebenza

Ukukhiqizwa kwamanzi amaminerali, amanzi entwasahlobo, noma olunye uketshezi oluyinyumba.
Ukuphuza ukwelashwa kwamanzi ompompi, amanzi angaphezulu, amanzi omthombo kanye namanzi omfula.
Ukwelashwa kwangaphambili kwe-RO.
Ukwelashwa, ukugaywa kabusha kanye nokusetshenziswa kabusha kwamanzi angcolile ezimbonini.

Ukusebenza Kokuhlunga

Lo mkhiqizo ufakazelwa ukuthi unemiphumela yokuhlunga engezansi ngokwemibandela yesevisi yemithombo yamanzi ehlukene:

Isithako Umphumela
SS, Izinhlayiya > 1μm Isilinganiso Sokususwa ≥ 99%
I-SDI ≤3
Amagciwane, Amagciwane > 4 ilogi
I-Turbidity <0. 1NTU
I-TOC Isilinganiso sokususa: 0-25%

*Idatha engaphezulu itholakala ngaphansi kwesimo sokuthi ukuthuthumela kwamanzi okuphakelayo kungu-< 15NTU. Lo mkhiqizo ufanelekile emikhiqizweni ehlobene namanzi okuphuza.

Amapharamitha womkhiqizo

incazelo yomkhiqizo1

Imingcele Yezobuchwepheshe

Uhlobo Lokuhlunga phendukezelwe
I-Membrane Material I-PVC eshintshiwe
UMCO 100K Dalton
Indawo yeMembrane 19m2
I-ID/OD ye-Membrane 1.0mm/1.8mm
Ubukhulu Φ200mm*1016mm
Usayizi Wesixhumi Φ29 mm

Idatha Yohlelo Lokusebenza

I-Pure Water Flux 5,000L/H (0.15MPa, 25℃)
I-Flux eyakhelwe ngaphakathi 35-100L/m2.hr (0.15MPa, 25℃)
Ingcindezi Yokusebenza Ephakanyisiwe ≤ 0.2MPa
Ubukhulu be-Transmembrane Pressure 0.2MPa
Izinga Lokushisa Eliphezulu Lokusebenza 45℃
PH Ububanzi Ukusebenza: 4-10; Ukugeza: 2-12
Imodi yokusebenza I-cross-flow noma i-Dead-end

Ukondla Izidingo Zamanzi

Ngaphambi kokuphakela amanzi, isihlungi sokuvikela esingu-<50 μm kufanele sisethwe ukuvimbela ukuvinjelwa okubangelwa izinhlayiya ezinkulu emanzini aluhlaza.

I-Turbidity ≤ 15NTU
Amafutha & Amafutha ≤ 2mg/L
SS ≤ 20mg/L
Insimbi Ephelele ≤ 1mg/L
I-Chlorine Esele Eqhubekayo ≤ 5ppm
I-COD Okuphakanyisiwe ≤ 500mg/L

*Impahla ye-UF membrane iyipulasitiki ye-polymer organic, akumele kube khona noma yiziphi izincibilikisi zemvelo emanzini aluhlaza.

Amapharamitha Okusebenza

Maximum Backwashing Pressure 0.2MPa
I-Backwashing Flow Rate 100-150L/m2.hr
I-Backwashing Frequency Njalo ngemizuzu engama-30-60.
Ubude besikhathi sokugeza emuva 30-60s
Imvamisa ye-CEB 0-4 izikhathi ngosuku
CEB Ubude besikhathi 5-10 min.
Imvamisa ye-CIP Njalo ezinyangeni ezingu-1-3
Amakhemikhali Okugeza:
Ukuvala inzalo 15ppm Sodium Hypochlorite
Ukugeza Okungcolile Kwezinto Eziphilayo 0.2% I-Sodium Hypochlorite + 0.1% I-Sodium Hydroxide
I-Inorganic Pollution Washing 1-2% Citric Acid/0.2% Hydrochloric Acid

Ingxenye Material

Isakhi Okubalulekile
I-membrane I-PVC eshintshiwe
Ukubeka uphawu Ama-Epoxy Resins
Izindlu I-UPVC

  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona